Services

Furnaces

Tube furnaces

Tube furnaces provide even heating of the tube surface for maximum temperature uniformity.

The available models:

  • Carbolite STF 15/610, up to 1500 °C in air.
  • Carbolite STF 12/900, up to 1200 °C in air.

Tube furnace combined with a gas system

This setup allows to conduct different temperature treatments up to 1500 °C in a selected gas environment, such as Argon or Nitrogen.

A furnace combined with gas system
Box furnace

Box Furnace

Allows heating up to 1100 °C in air, with programmable dwell time.

DIL802 differential dilatometer

Allows differential measurements of thermal expansion coefficients up to 1700 °C.

This measurement design is of particular benefit for dynamic temperature programs such as those employed in Rate-Controlled-Sintering (RCS) and for measurements of samples with small thermal expansion.

Read more about DIL802

Dilatometer DIL802
Upgraded Dilatometer 801

An upgraded dilatometer DIL801

Allows to carry out combined measurements of the coefficients of thermal expansion up to 1500 °C and electrical impedance in situ.

Read more about DIL801

Tube furnace combined with a gas system

This setup allows to carry out impedance spectroscopy in the frequency range from 1 MHz to 1 mHz, at temperatures up to 600 °C.

Biologic SP-200 / SP-240 / SP-300 Potentiostat/ Galvanostat can be used.

Read more about Biologic SP-200/ SP-240/ SP-300

Potentiostat Galvanostat and furnace
Four-point measurements

Four-point measurements

 

Based on Keithley 2400 Source-Meter and Special Soft-Probe. Designed primarily for measuring conductive coatings.

Precision impedance measurements 

The measurement system based on Precision Impedance Analyzer Agilent 4294A.

Allows to carry out the Impedance Spectroscopy up to frequency 110 MHZ

Precision Impedance Analyzer
DLS

NanoBrook 90Plus PALS

An automatic particle sizer designed for use with either concentrated suspensions of small particles or solutions of macromolecules.

Read more about NanoBrook 90Plus PALS

Form 2 3D printer

A Desktop Stereolithography 3D Printer

Read more about Form 2

 

3D printer
Carver Press

Carver Press

Carver 12 ton bench top manual hydraulic press with electrically heated platens up to 300°C, model 5420.

Carver bench top manual pellet press, model 4350.

Read more about Carver Press

Cold isostatic press CIP-M20

CIP is used for pressing samples with regular and irregular shapes in a high-pressurized chamber, making the sample highly compressed and leading to higher density and strength.

Read more about CIP-M20

CIP
Parr reactor

Parr reactor

A high pressure, compact laboratory reactors.

Parr controller model 4848 with 600 mL reactor vessel, equipped with gas inlet and outlet valves, a liquid sampling valve, pressure gage, safety rupture disc, and internal thermocouple.

Read more about Parr Reactor